It’s a dream to work with this hose and wash you vehicle without the worry of kinking. Gone are the days that you have to fight with your hose! This high pressure quality hose was designed to fit high pressure machines, to give you the optimum pressure and flow rate.
The Kobrajet is safe for use alongside hot water pressure washers and it will lay flat on the ground, even when under pressure. The hose unravels perfectly every time and it is extremely easy to move around, even when pressurised.
This high quality constructed Kobrajet hose is rated up to 4000 PSI. For pressure washing your vehicle, the sweet spot is around 1200 PSI, so you will never need to get anywhere near the max pressure mark, but it is safe to say that this hose is compatible for many other industrial uses too.
The Black Kobrajet hose has a rough texture, and being black, it can cause marks on your driveway. The single wire hose weighs in at around 5.5kg without any quick connectors attached. We have given you the option to buy the hose with or without stainless steel quick connect attachments from the drop down menu.
It is important to choose the correct hose length for your specific machine, to ensure that you do not lose any pressure, and as this is a high pressure hose, you need to ensure that you have a high pressure machine to pair it up with.
Pressure Washer Hose To Machine Connections
There are many different connections needed to fit this hose to different machines; we wish it was a ‘one fits all’ scenario! To determine what connectors you will need to fit your specific machine to the Kobrajet, you should firstly find out what inlet and outlet thread your machine has by contacting the manufacturer.
For Karcher K Series machines, the Karcher adapter fits K4-K7 only.
Below, you will find the other connections that you will need to purchase separately in order to fit this hose to your specific machine:
If buying Kobrajet hose with QC included, all is needed is an M22 to ⅜’ 14mm Plug which attaches directly onto your machine. If buying standalone hose without QC, you will also need the following:
- M22 to ⅜’ 14mm Female Plug (Fits onto machine),
- 3/8″ Female Coupler (Fits into M22 and hose, rigid end)
- 3/8″ Female Coupler (Fits directly onto hose, swivel end)
All hoses will come with fittings installed and PTFE taped by our team. We would recommend that you double check the tightness of the fittings out of the box incase any tolerances have been knocked during the shipping process. If this is the case gently tighten further.