MTM Quick Connect Nozzles
MTM Quick Connect Nozzles
MTM Quick Connect Nozzles
MTM Quick Connect Nozzles
MTM Quick Connect Nozzles

MTM HYDRO STAINLESS STEEL 1/4 inch

Quick Connect Nozzles

MTM Hydro test their nozzle orifice accuracy and degree settings so you never have to worry about using an incorrect nozzle fan. They have manufactured their plastic tips alongside the stainless steel body to prevent the tips from falling off, making these the most premium tips of their kind available on the market.

Each pack contains:

  • 4 x colour coded nozzles.
  • Tips for a 0°, 15°, 25° and 40° fan pattern.
  • Tips are available for 3.0, 4.0, 4.5 and 5.5 from the menu selection.

£16.00

Clear
-
+
Product Details

Quick Connect Nozzles usually all look very similar, but they perform in many different ways. MTM Hydro Nozzles are made from stainless steel which offers extended life and is extremely important when they are in contact with water all the time. Stainless steel fittings prevent rust and corrosive particles transferring onto the vehicle which should not be overlooked when purchasing cheaper versions.

The different spray angles allow you to clean many different surfaces easily and effectively, and the tips can be changed from the pressure washer gun to lance in one swift movement.

Safety Tip

When changing your nozzle tips, always test it first by aiming away from the vehicle because if you haven’t connected it properly, you will cause the tip to fire off under pressure and cause damage.

Nozzle Orifice Size

This can be a tricky topic to understand, especially with so many pressure washer machines on today’s market. So, if you are not sure what orifice size you need, please either send us an email, call us, or simply write in your order notes what pressure washer make and model you have and we will ensure that you get the correct orifice size.

In short, the orifice size is determined by the pressure output (measured in PSI), and the maximum flow rate of your pressure washer machine to ensure you get the optimal flow rate and output at the tip. By choosing an orifice size which is either  too small or too big, it can put extra strain on your machine and cause huge problems in the long run and even break your machine so it is very important that you choose the correct size.

For Karcher K Series (K2-K4), we recommend a 3.0 orifice, for Karcher (K5-K7) we recommend a 4.0 orifice.

For a Nilfisk pressure washer please get in touch with us as the spread of flow rates is huge.

For Kranzle machines, we recommend:

  • Kranzle K7: 3.0
  • Kranzle k10: 4.5
  • Kranzle 1152 TST: 4.5

For any pressure washers with the similar outputs as the above mentioned, choose the same recommended size. If you are still unsure which orifice you may need, please contact us for help.

MTM Quick Connect Nozzles

£16.00

Clear
-
+

Buy now and pay later in 3 payments. No fees. More info…