We have tried and tested many turbo nozzles but the weight and size was always a problem. Our iteration is much smaller in size, yet more importantly, lighter in weight, yet it packs a serious punch. It will literally destroy anything that it meets in its path so watch those fingers, and eyes!
This accessory is perfect for those stubborn areas and it will actually save you so much time because the rotating head can cover so much more of an area than the usual nozzle fan patterns.
We would recommend wearing gloves and eye protection when using this attachment, as the spinning water will fire away dirt and you don’t want it heading your way!
This is an absolute game changer in the carpeted arch liner department. Rather than spending up to 5 minutes per arch with a traditional nozzle spend under 30 seconds and in one flush get your arches back to OEM condition with no problems.
Important User Instructions
This turbo nozzle is designed to be fired in a downwards direction. If you fire the nozzle upwards, you may cause the special rotating balls inside the head to crash together and break, and you will just see a stream of water without any rotation.
Nozzle Assembly Orifice Size Guide
We understand that this is a tricky topic to understand, especially with so many pressure washer machines on today’s market. So, if you are not sure what orifice size you need, please either send us an email, call us, or simply write in your order notes what pressure washer make and model you have and we will ensure that you get the correct orifice size.
In short, the orifice size is determined by the pressure output (measured in PSI), and the maximum flow rate of your pressure washer machine to ensure you get the optimal flow rate and output at the tip. By choosing an orifice size which is either too small or too big, it can put extra strain on your machine and cause huge problems in the long run and even break your machine so it is very important that you choose the correct size.
For Karcher K Series (K2-K4), we recommend a 3.0 orifice, for Karcher (K5-K7) we recommend a 4.0 orifice.
For a Nilfisk pressure washer please get in touch with us as the spread of flow rates is huge.
For Kranzle machines, we recommend:
- Kranzle K7: 3.0
- Kranzle K10: 4.5
- Kranzle 1152 TST: 4.5
For any pressure washers with the similar outputs as the above mentioned, choose the same recommended size. If you are still unsure which orifice you may need, please contact us for help
